The A-series gun is an eductor (suction feed) type gun designed to clean hard-to-reach areas
with clearance as small as six inches.
Part Number: 13274-M25 (gun and 25' hose assembly)
A-series Barrels - available USED
Barrels shown above are durable ABS plastic and come in various
sizes.
This allows use of different stingers to easily adjust airflow.
These are the most common sizes sold:
3" Barrel - Part Number: 12751-533
5" Barrel - Part Number: 12751-535
6" Barrel - Part Number: 12751-536
A-series Stingers are available USED
Stingers allowed the user to quickly change airflow at the gun
barrel. Color-coded for easy identification. Green is low-flow,
yellow is medium flow, red is high-flow.
These are the most
common pressure sizes sold - we still have some USED stock:
G50 PSI: Part Number:
12748-011
Y50 PSI: Part Number:
12748-021
R50 PSI: Part Number:
12748-031
The D-series Gun
The D-series is the standard gun delivered with Alpheus eductor
(suction feed) type portable blasting units. PT-110, PLT-5, PLT-5X, SDI-5 Its lightweight, ergonomic
design allows users to blast comfortably for long periods of time at blast
pressures up to 125 psig (8 bar). This gun can use the rice-size dry ice
pellets as well as the smaller granules produced by the SDI-5. A selection
of optional barrels can be attached to maximize cleaning efficiency.
Part Number: 13208-M25 (gun and 25' hose assembly)
The D-series Gun Standard Barrel
Made of durable ABS plastic, these 4" to 8" barrels are
available in various diameters. This allows use of different
stingers to easily adjust airflow.
These are the most common
sizes sold:
4" Barrel - Part Number: 12751-564
6" Barrel - Part Number:
12751-566
8" Barrel - Part
Number: 12751-568
The D-series Gun Aluminum Barrel (round)
Forged from rugged aluminum,
this barrel provides an extra degree of durability to help it better withstand
rough handling such as being dropped or run over.
Part Number: 13266-XXX
Our most effective, aggressive fan barrel for use with the
SDI-5, PLT-5, or PT-110.
Fan is 2½" wide at the
tip.
Part Number: 13407-001
The N-series Gun - available USED
This is the gun of choice for applications requiring pressures
of 125 to 250 psig (8-16 bar). It is designed for use with CO2
MiniBlast models SDI-5 and PLT-5. This eductor (suction feed) type gun
can blast the sugar-sized granules produced by the SDI-5 as well as the
rice-sized dry ice pellets used by either machine.
Part Number:
12400-001*
Barrel shown above is
durable ABS plastic and comes in various sizes. This allows use of
different stingers to easily adjust airflow.
Part
Number: 12413-xxx
This barrel
provides a wider cleaning pattern than the round barrel. It quickly
locks into place for easy change-over.
Part Number:
11707-001
S-series Gun no longer available, no longer suppoted
S-series
Gun Blast Barrel - we still have some new stock
These blast barrels are
designed for use with the positive feed type S-series gun. They can be
changed quickly without tools and come in a range of diameters and pre-shaped
angles.
Part Number: 13427-345 (3/8" - 45°)
Part Number: 13427-745 (7/16" - 45°)
Part Number: 13427-300 (3/8" - STR)
Part Number: 13427-700 (7/16" - STR)
This barrel provides a wider cleaning pattern than the round
barrel. It quickly locks into place for easy change-over.
Part Number: 13430-001 (12" Fan)
The standard, round barrel for the positive-feed type S-series gun locks
quickly into place. Durable aluminum barrel withstands impact and rough
handling of daily in-plant use.
Part Number: 13432-001 (.315" - STR)
Part Number: 13432-002 (.525" - STR)
A positive feed type
barrel that delivers blasting power to areas that are beyond normal reach.
Allows safe blasting of deep areas such as metal enclosures, etc.
Part Number: 13426-001 (24")